Skip to product information
1 of 2

Neotech NES-3005 MKII speaker cable 2m

Neotech NES-3005 MKII speaker cable 2m

Neotech NES-3005 MKII is a quality speaker cable designed for hi‑fi and high‑end systems where low losses and stable impedance are key to faithful reproduction. Its purpose is to connect power amplifiers to speakers with minimal signal degradation over lengths typical of home installations.

Technical characteristics

  • Manufacturer/category: Neotech, speaker cable
  • Conductor: UP-OCC monocrystalline copper (multilayer twisted, low-oxygen), low-resistance construction
  • Geometry: two-wire, carefully twisted conductors with mechanical separation to reduce parasitic capacitance and inductance
  • Dielectric/sheath: low dielectric polymer (PE/PP) with protective outer jacket for abrasion resistance
  • Cross Section/Conductivity: Equivalent to approximately 12-14 AWG per pole (high current carrying capacity for home audio applications)
  • Electrical parameters (typical for this geometry): resistance of the order of milliohms per meter; capacitance in tens of pF/m; inductance in hundreds of nH/m
  • Length: 2 m
  • Connection compatibility: suitable for termination with bananas (4 mm) or plugs (6–8 mm), as well as stripped ends
  • Compliance: RoHS

Sound characteristics

Emphasized neutrality with good definition of transients. The bass is tight and controlled, the midrange is clear and informative, and the high frequency range is smooth without harshness. The stereo scene is stable with precise positioning, with a sense of dynamics that remains consistent even at higher volumes.

Compatibility and application

Excellent fit from low to high power transistor and tube amplifiers and 4–8 Ω impedance speakers. Recommended for systems of neutral or slightly warm character where the focus is on transparency without adding tonal color. A length of 2 m is optimal for most stereo setups (rack between speakers).

Condition and maintenance

Condition: used, excellent. Visually preserved, with no visible damage to the sheath or conductor breaks. No modifications; no service is required as it is a passive component. Recommendation: periodically check the tightness of the connections and the cleanliness of the contact surfaces for optimal signal transmission.

Price per piece: 200 EUR

Contact us about this product

View full details